打印
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    2025 SEM 512 Used 平滑滚筒式压实机2025 SEM 512 Used 平滑滚筒式压实机
    照片(19)
    $38,000 

    Achieve Innovations (Changsha) Co., Ltd.

    联系人:Keeway He

    Changsha, 中国 410003

    常规

    年限
    2025
    制造商
    型号
    小时
    100
    状况
    二手
    库存号
    QFSEM019
    描述
    SEM512 roller Rated power: 97.5kW Rated speed: 2,200r/min Minimum turning radius: 5,990 mm model model SEM512 engine Engine model WP4G130E22 Emission standards Country II Standard power rating 97.5kw Rated speed 2,200r/min Working parameters Operating weight (standard) 12,000kg Mass Distribution (Front) 6,960kg Mass Assignment (After) 5,100kg Static pressure 317N/cm Maximum climbing capacity (no vibration) 45% articulated deflection angle 33±1° Minimum turning radius 5,990mm compaction width 2,130mm Travel speed Low gear 0-6km/h High gear 0-12km/h Vibration system Vibration frequency - high/low 33/30Hz Amplitude - high/low 1.8/0.9mm Excitement 245/150kN Dimensional parameters Dimensions (L*W*H) 5.815*2.290*3.130mm Rear axle swing angle 10±1° wheelbase 2,900mm Drum width 2,130mm Drum diameter 1,600mm Tires Tire specifications 23.1-26 12PR12 Inflation pressure 0.2MPa Capacity parameters Fuel tank 200L Engine oil 10L Coolant 26L Hydraulic tank 22L Note: Product parameters may vary due to different country regulations or configurations, the above information is for reference only, please contact your local dealer for details.

    类别特定

    Operating Weight
    16,900 千克

    Exterior

    驾驶室
    封闭式

    动力总成

    最大行驶速度
    12 km/h

    发动机

    马力
    97.5 kW
    引擎品牌
    WEICHAI
    翻修至今时数
    100

    船运尺寸

    运输长度
    58.15 m
    运输宽度
    22.9 m
    运输高度
    31.3 m
    运输重量
    12,000 千克