1 - 28 of 70 Listings
Rent
All
Serial Number: 083020059
Condition: Used
Description: This Gleaner 830 has 8 rows with 30" spacing. Good working head this came to us from someone local that is retiring.
Updated: Thursday, September 17, 2026 06:51 AM
Location: Greenwich, Ohio, USA
Seller: J Star Equipment
Cutterbar Type: Flex
Serial Number: 2042416F
Condition: Used
Stock Number: 26
Description: AGCO 500 | Serial #2042416F
For additional information please contact Ron Hirt: 785-448-9010.
20' flex head
Header trailer
6T P&K
Straight a...
Updated: Thursday, September 10, 2026 09:37 AM
Location: Westphalia, Kansas, USA
Seller: Flory & Associates Realty & Auctions
Cutting Width: 4.57 m
Serial Number: HS05490
Condition: Used
Description: Good working header
All new conditioner bearings
Updated: Thursday, September 03, 2026 12:00 PM
Location: Hobson, Montana, USA
Seller: TJ Equipment LLC
Hours: 4,258
HasPTO: Yes
Transmission Type: CVT
Drive: MFWD
Engine Horsepower: 215 HP
Serial Number: R286047
Description:
Updated: Tuesday, September 15, 2026 12:58 PM
Location: Oskaloosa, Iowa, USA
Seller: Arrowhead Realty Co.
Condition: Used
Stock Number: 3702932
Description: PF 12,20 M/ 40" SCHNEIDWERK
(0010) T786 Fendt Schneidwerk
(0020) Z422 Schneidwerk 40´ PF (12,20m) SuperFlow
(0030) Z731 Ährenheber PF 40´ (12,20...
Updated: Friday, July 31, 2026 10:15 AM
Location: Meppen, Lower Saxony, Germany
Seller: ATC - AGRAVIS Technik Center GmbH
Width: 9.14 m
Cutterbar Type: Rigid
Serial Number: 3042660G
Condition: Used
Stock Number: 5090
Gathering Type: Auger
Description:
Updated: Friday, August 28, 2026 10:59 AM
Location: Madrid, Nebraska, USA
Seller: Regier Equipment Co. Inc.
Width: 6.1 m
Serial Number: 2044186F
Condition: Used
Description: 20' flex head,
1 1/2" sickle,
pipe reel,
plastic teeth,
Good Poly bottom.
Updated: Monday, September 14, 2026 02:38 PM
Location: Pound, Wisconsin, USA
Seller: Dan Bieber Equipment
Width: 6.1 m
Serial Number: 2040337F
Condition: Used
Description: 20' flex head,
3 " sickle,
fore/aft,
Godd poly bottom.
Updated: Monday, September 14, 2026 02:38 PM
Location: Pound, Wisconsin, USA
Seller: Dan Bieber Equipment
Width: 9.14 m
Air Reel: Yes
Serial Number: 30F-HN84330
Condition: Used
Stock Number: ADGT
Description: AGCO 800 GRAIN TABLE, THIS UNIT HAS A CRARY AIR REEL. HEAD CART IS NOT INCLUDED, FARMER WANTS TO KEEP THE CART. WILLING TO DISCUSS.
Updated: Tuesday, September 08, 2026 09:12 AM
Location: Taylorsville, Kentucky, USA
Seller: Wayne's Farm Machinery
Width: 7.62 m
Cutterbar Type: Flex
Serial Number: 2554926F
Condition: Used
Stock Number: 2299
Gathering Type: Auger
Description:
Updated: Friday, August 28, 2026 10:59 AM
Location: Madrid, Nebraska, USA
Seller: Regier Equipment Co. Inc.
Width: 6.1 m
Cutterbar Type: Flex
Serial Number: 2081266F
Condition: Used
Gathering Type: Auger
Description: AGCO/Gleaner 800 Grain Platform
-20' working width
-SCH sickle
-Yellow plug or single point
-Hydraulic reel
-Came off of Massey-Ferguson ...
Updated: Tuesday, September 08, 2026 07:28 AM
Location: Camp Point, Illinois, USA
Seller: Bastert Farm Equipment
Rows: 8
Row Spacing: 76.2 cm
Stalk Stompers: Yes
Serial Number: 0830MJ27149
Condition: Used
Chopping Capabillity: Non Chopping
Description: Gleaner 830 Hugger, 8x30, stalk stompers, poly, ear savers
BEFORE DRIVING, PLEASE CALL TO CONFIRM LOCATION AND AVAILABILITY OF EQUIPMENT!!!
Updated: Friday, September 11, 2026 02:29 PM
Location: Huntington, Indiana, USA
Seller: Ayers Machinery
Rows: 8
Row Spacing: 76.2 cm
Rolls: Standard
Serial Number: 830-HL27165
Condition: Used
Stock Number: W56057
Description: CALL FOR PRICE AND INFO
Updated: Thursday, September 10, 2026 01:33 PM
Location: Pomeroy, Iowa, USA
Seller: Western Iowa Equipment
Rows: 6
Row Spacing: 91.44 cm
Rolls: Standard
Serial Number: AGCR636TOAHCH1167
Number of Stalk Stompers: 0
Condition: Used
Description: VERY NICE 3000 SERIES AGCO CORN HEAD 6 ROWS 36" SPACING
Updated: Thursday, September 17, 2026 09:47 AM
Location: Williamston, North Carolina, USA
Seller: Lilley International - Williamston
Serial Number: HU27247
Condition: Used
Stock Number: H35940
Description: Used AgCo 3000 8RN corn head, dual drive, poly snouts,
fits Gleaner Lat tilt combines
Updated: Wednesday, September 02, 2026 04:16 PM
Location: Wausau, Wisconsin
Seller: Swiderski Equip, Inc. - Wausau
Rows: 6
Row Spacing: 76.2 cm
Rolls: Standard
Serial Number: 630RHP27431
Condition: Used
Stock Number: 14706
Description: Nice 3000 head, poly, 6x30 head, single point, lateral,
Updated: Thursday, September 10, 2026 02:55 PM
Location: Charlotte, Michigan, USA
Seller: Williams Farm Machinery, Inc
Rows: 8
Row Spacing: 76.2 cm
Rolls: Standard
Serial Number: 830RHN27563
Condition: Used
Warning Lights Work: Yes
Description: poly electric stripper plates
Updated: Saturday, September 12, 2026 09:49 AM
Location: Chesaning, Michigan, USA
Seller: Card Bros. Equipment, Inc.
Rows: 8
Row Spacing: 76.2 cm
Serial Number: HM27139
Condition: Used
Warning Lights Work: Yes
Chopping Capabillity: Non Chopping
Description: 830 poly electric deck plates
Updated: Saturday, September 12, 2026 09:49 AM
Location: Chesaning, Michigan, USA
Seller: Card Bros. Equipment, Inc.
Rows: 8
Row Spacing: 76.2 cm
Serial Number: 083025511
Condition: Used
Description: 3000 hugger poly
corn head
8 row 30
2 owner like new snapping roll blades
Good chains
Updated: Thursday, September 03, 2026 09:36 AM
Location: Media, Illinois, USA
Seller: Cole Implement Co.
Serial Number: 2046473F
Condition: Used
Stock Number: H37606
Description: Used AGCO 520-20' Flex Bean Head, off Gleaner R62,
lateral tilt, schumacher sickle.
Updated: Monday, August 10, 2026 03:29 PM
Location: Wausau, Wisconsin
Seller: Swiderski Equip, Inc. - Wausau
Width: 6.1 m
Cutterbar Type: Flex
Serial Number: 20F-HL84458
Condition: Used
Gathering Type: Auger
Description: Very good Agco 20’ flex head with newer cutter bar, was used on MF 8780XP combine
Updated: Thursday, September 03, 2026 02:35 PM
Location: Norfolk, Nebraska, USA
Seller: Pfeifer's Machinery Sales
Width: 9.14 m
Cutterbar Type: Flex
Serial Number: 30FRHP84210
Condition: Used
Gathering Type: Auger
Description: Agco 8000, 30’ grain platform, single point, sch knife, electric fore/aft, safety lights.
BEFORE DRIVING, PLEASE CALL TO CONFIRM LOCATION AND AVAI...
Updated: Friday, September 11, 2026 02:29 PM
Location: Huntington, Indiana, USA
Seller: Ayers Machinery
Serial Number: 2054568F
Condition: Used
Description:
Updated: Tuesday, August 18, 2026 02:29 PM
Location: Gibsonburg, Ohio, USA
Seller: Haar Brothers
Width: 9.14 m
Cutterbar Type: Flex
Air Reel: Yes
Serial Number: AGCR8230TDHW08119
Condition: Used
Stock Number: 27154
Description:
Updated: Friday, September 04, 2026 02:30 PM
Location: Kokomo, Indiana, USA
Seller: Plevna Implement
Width: 7.62 m
Cutterbar Type: Flex
Serial Number: HTW8271
Condition: Used
Stock Number: 9055
Gathering Type: Auger
Description: 25', full finger, single point
Updated: Tuesday, September 15, 2026 12:01 PM
Location: Sigel, Illinois, USA
Seller: Sigel Equipment Co., Inc.
Width: 9.14 m
Condition: Used
Stock Number: 10574
Description: 30' Flex... Agco Gleaner Offset Rotary Combine Hook Up... ASK for Availability of Massey, Challenger, Gleaner A Series Center Throat Combine Hook U...
Updated: Thursday, September 17, 2026 02:12 PM
Location: Glencoe, Minnesota, USA
Seller: Haukos Bros Inc.
Width: 10.67 m
Cutterbar Type: Flex
Serial Number: AGCR8235TKHW08103
Condition: Used
Gathering Type: Auger
Description: 2008 35’ flex auger - very clean
Updated: Monday, August 24, 2026 02:45 PM
Location: Saint Francis, Kansas, USA
Seller: Yost Farm Supply (St. Francis)
Width: 7.62 m
Cutterbar Type: Flex
Contour: Yes
Air Reel: Yes
Condition: Used
Stock Number: 19312
Description: 2007 Gleaner 8200-25R flex head with Crary air reel, 25' working width, Single-point hydraulics, Single drive, 6-bar reel with plastic teeth, 1 3/8...
Updated: Tuesday, September 01, 2026 03:44 PM
Location: Waldo, Wisconsin, USA
Seller: Gibbsville Implement, Inc.