1 - 28 of 83 Listings
Rent
All
Cutting Width: 7.62 m
Serial Number: UKNOWN
Condition: Used
Gathering Type: Auger
Hydraulic Hookup: Single Point
Description: AGCO 6000 25ft stripper head with a Unverfe.rth HT30 header cart. Both are in good condition as shown in pictures. Located in New Haven Ky. Can hel...
Updated: Thursday, October 01, 2026 07:01 AM
Location: New Haven, Kentucky, USA
Seller: Hardin Agri Service
Cutting Width: 9.14 m
Cutterbar Type: Flex
Air Reel: Yes
Serial Number: 30RFHP84590
Condition: Used
Gathering Type: Auger
Description: Gleaner 8000 30' flex head with Crary Air Reel. SCH Sickle. New sickle drive gearbox in 2024. New Crary gearbox in 2024. New PTO shaft in 2024....
Updated: Thursday, October 01, 2026 07:01 AM
Location: Walton, Kansas, USA
Seller: C&H Auction Co.
Cutting Width: 7.62 m
Cutterbar Type: Flex
Air Reel: Yes
Serial Number: 2554431F
Condition: Used
Gathering Type: Auger
Description: This fits onto the Agco R series combine. Included in this sale are two other heads 2000 Agco 830 and 1999 Agco 800. Lots 8910 and 8909.
Updated: Monday, October 05, 2026 10:11 AM
Location: Tama, Iowa, USA
Seller: Mid Iowa Auction Company
Cutting Width: 9.14 m
Cutterbar Type: Flex
Serial Number: 3055010F
Condition: Used
Gathering Type: Auger
Reel Type: Bat
Description: This fits onto the Agco R series combine. Included in this sale are two other heads 2000 Agco 800 and 2000 Agco 830. Lots 8875 and 8910.
Updated: Monday, October 05, 2026 10:14 AM
Location: Tama, Iowa, USA
Seller: Mid Iowa Auction Company
Number of Rows: 8
Row Spacing: 76.2 cm
Rolls: Knife
Stalk Stompers: Yes
Cutting Width: 9.14 m
Serial Number: 083025680
Description: 830 Hugger
This fits onto the Agco R series combine. Included in this sale are two other heads 2000 Agco 800 and 1999 Agco 800. Lots 8875 and 8909.
Updated: Monday, October 05, 2026 10:12 AM
Location: Tama, Iowa, USA
Seller: Mid Iowa Auction Company
Cutting Width: 4.57 m
Serial Number: HS05490
Condition: Used
Description: Good working header
All new conditioner bearings
Updated: Monday, October 05, 2026 10:00 AM
Location: Hobson, Montana, USA
Seller: TJ Equipment LLC
Hours: 6,734
Transmission Type: CVT
Drive: MFWD
Loader: Yes
Engine Horsepower: 170 HP
Serial Number: T126040
Description: Unit is sold as is it will come with a bucket for the loader it has a tweak in the loader when you first raise it the 3 rear remote is not working ...
Updated: Monday, October 05, 2026 08:18 AM
Location: Irwin, Iowa, USA
Seller: Robinson Implement
Serial Number: 830-HK27135
Condition: Used
Stock Number: I_CHA01181482
Description: Gleaner 3000 8-30” Corn Head, poly snouts, new gathering chains and sprockets after harvest last year, Calmer Knife rolls and Deck Plates, good hea...
Updated: Tuesday, October 06, 2026 07:40 AM
Location: Columbia City, Indiana, USA
Seller: Schrader Real Estate and Auction Company, Inc
Condition: Used
Stock Number: 207774
Description: CHA. MFWD. 18-Spd P.Shift. 1000 Pto & 4 SCV. Rear Duals 480/80R42. Shows 4373 Hrs. Quantity: 1
Updated: Thursday, October 01, 2026 03:51 PM
Location: Clinton, Missouri, USA
Seller: Cook Auction Company
Serial Number: N28E22GK313H
Condition: Used
Stock Number: 207816
Description: CHA. MFWD. 24-Spd P.Shift. Dual Pto & 4 SCV. Rear Duals 480/80R42. Shows 3681 Hrs. Quantity: 1
Updated: Thursday, October 01, 2026 03:54 PM
Location: Clinton, Missouri, USA
Seller: Cook Auction Company
Serial Number: 2044470F
Condition: Used
Stock Number: 8161
Description: Pipereel w/ plastic teeth, jolly cranks on reel adjustment poly skid plates, lights, SN: 2044470F Quantity: 1
Updated: Monday, September 28, 2026 09:40 PM
Location: Brillion, Wisconsin, USA
Seller: C.A. Tesch Equipment
Condition: Used
Stock Number: 173
Description: Agco DT240A tractor, CHA, MFD, 480/80R46 rear axle duals, 380/85R34 front duals, Power Maxx CVT trans, 4-hyds, 3-pto capable, cab suspension, 15-fr...
Updated: Sunday, October 04, 2026 03:30 PM
Location: Merrill, Wisconsin, USA
Seller: Wausau Auctioneers
Hours: 4,258
Rear PTO: Yes
Transmission Type: CVT
Drive: MFWD
Engine Horsepower: 215 HP
Serial Number: R286047
Description:
Updated: Tuesday, September 15, 2026 12:58 PM
Location: Oskaloosa, Iowa, USA
Seller: Arrowhead Realty Co.
Cutting Width: 7.62 m
Cutterbar Type: Flex
Air Reel: Yes
Serial Number: 25MJ84190F
Condition: Used
Gathering Type: Auger
Description: Flex cutter bar header with air reel, spare cutter bar included, head cart not included
Updated: Thursday, October 01, 2026 03:53 PM
Location: Edgewood, Iowa, USA
Seller: Del-Clay Farm Equipment
Condition: Used
Stock Number: 3702932
Description: PF 12,20 M/ 40" SCHNEIDWERK
(0010) T786 Fendt Schneidwerk
(0020) Z422 Schneidwerk 40´ PF (12,20m) SuperFlow
(0030) Z731 Ährenheber PF 40´ (12,20...
Updated: Wednesday, September 30, 2026 07:30 AM
Location: Meppen, Lower Saxony, Germany
Seller: ATC - AGRAVIS Technik Center GmbH
Cutting Width: 9.14 m
Cutterbar Type: Rigid
Serial Number: 3042660G
Condition: Used
Stock Number: 5090
Gathering Type: Auger
Description:
Updated: Friday, September 25, 2026 08:46 AM
Location: Madrid, Nebraska, USA
Seller: Regier Equipment Co. Inc.
Cutting Width: 6.1 m
Serial Number: 2044186F
Condition: Used
Description: 20' flex head,
1 1/2" sickle,
pipe reel,
plastic teeth,
Good Poly bottom.
Updated: Tuesday, September 29, 2026 07:41 AM
Location: Pound, Wisconsin, USA
Seller: Dan Bieber Equipment
Cutting Width: 9.14 m
Air Reel: Yes
Serial Number: 30F-HN84330
Condition: Used
Stock Number: ADGT
Description: AGCO 800 GRAIN TABLE, THIS UNIT HAS A CRARY AIR REEL. HEAD CART IS NOT INCLUDED, FARMER WANTS TO KEEP THE CART. WILLING TO DISCUSS.
Updated: Tuesday, September 08, 2026 09:12 AM
Location: Taylorsville, Kentucky, USA
Seller: Wayne's Farm Machinery
Cutting Width: 7.62 m
Cutterbar Type: Flex
Serial Number: 2554926F
Condition: Used
Stock Number: 2299
Gathering Type: Auger
Description:
Updated: Friday, September 25, 2026 08:46 AM
Location: Madrid, Nebraska, USA
Seller: Regier Equipment Co. Inc.
Cutting Width: 6.1 m
Cutterbar Type: Flex
Serial Number: 2081266F
Condition: Used
Gathering Type: Auger
Description: AGCO/Gleaner 800 Grain Platform
-20' working width
-SCH sickle
-Yellow plug or single point
-Hydraulic reel
-Came off of Massey-Ferguson ...
Updated: Tuesday, September 29, 2026 04:28 PM
Location: Camp Point, Illinois, USA
Seller: Bastert Farm Equipment
Cutting Width: 7.62 m
Serial Number: 2554485F
Condition: Used
Stock Number: 50607
Description: Agco 25' flex head w/ Crary air reel, 3" cut, good floor, good poly, low acre head, estate item, call Nick w/ any questions.
Updated: Tuesday, September 29, 2026 01:11 PM
Location: Cornlea, Nebraska, USA
Seller: Michael Wegener Implement Inc
Number of Rows: 8
Row Spacing: 76.2 cm
Stalk Stompers: Yes
Serial Number: 0830MJ27149
Condition: Used
Chopping Capabillity: Non Chopping
Description: Gleaner 830 Hugger, 8x30, stalk stompers, poly, ear savers
BEFORE DRIVING, PLEASE CALL TO CONFIRM LOCATION AND AVAILABILITY OF EQUIPMENT!!!
Updated: Tuesday, October 06, 2026 05:19 AM
Location: Huntington, Indiana, USA
Seller: Ayers Machinery
Serial Number: 083017061
Condition: Used
Stock Number: 28995
Description: Agco 830 Corn Head, 8 row, 30"
Updated: Friday, October 02, 2026 09:21 AM
Location: Gallatin, Missouri, USA
Seller: B and S Equipment Sales LLC
Number of Rows: 8
Row Spacing: 76.2 cm
Rolls: Standard
Serial Number: 830-HL27165
Condition: Used
Stock Number: W56057
Description: CALL FOR PRICE AND INFO
Updated: Thursday, October 01, 2026 08:40 AM
Location: Pomeroy, Iowa, USA
Seller: Western Iowa Equipment
Number of Rows: 6
Row Spacing: 76.2 cm
Serial Number: AGCR630T0EHCH1297
Condition: Used
Stock Number: 4108
Description: AgCo 3000 Corn Head, 6 Row 30" Spacing, Single Point, Newer Front Sprockets & Chains, Non Chopping, Very Clean Local Trade, Came Off Gleaner S96.....
Updated: Monday, September 28, 2026 01:37 PM
Location: Napoleon, Ohio, USA
Seller: Paul Martin & Sons
Number of Rows: 6
Row Spacing: 91.44 cm
Rolls: Standard
Serial Number: AGCR636TOAHCH1167
Number of Stalk Stompers: 0
Condition: Used
Description: VERY NICE 3000 SERIES AGCO CORN HEAD 6 ROWS 36" SPACING
Updated: Friday, September 18, 2026 08:39 AM
Location: Williamston, North Carolina, USA
Seller: Lilley International - Williamston
Number of Rows: 16
Row Spacing: 50.8 cm
Rolls: Standard
Serial Number: 1230RHP27328
Condition: Used
Chopping Capabillity: Non Chopping
Description: Customer Consignment on the farm near Guthrie Center They converted a 1230 into a 16 Row 20" head they added 4 new row units to it call for more in...
Updated: Friday, October 02, 2026 10:10 AM
Location: Irwin, Iowa, USA
Seller: Robinson Implement
Number of Rows: 6
Row Spacing: 76.2 cm
Rolls: Standard
Serial Number: 630RHP27431
Condition: Used
Stock Number: 14706
Description: Nice 3000 head, poly, 6x30 head, single point, lateral,
Updated: Monday, September 28, 2026 08:54 AM
Location: Charlotte, Michigan, USA
Seller: Williams Farm Machinery, Inc